Just like it says, I am parting out my '92 VR4. EVERYTHING will be for sale!

Here's part of a list that I just threw together. There's more, just ask....


RPS Maxx Street Clutch(3,000 miles on it) - $400
Fidanza Flywheel(13,000 miles on it) - $250
Nearly Complete 25 Spline Trans - make an offer
Pearl White Hood - $50
17" Stock wheels - $300
driveshaft - make an offer
rear end - make an offer
brakes - make an offer
Stock Intercoolers - make an offer
Misc Engine Parts - make an offer
3 Engine Blocks(Turbo, 2 bolt) - $50 each, all need bore
Stock Heads w/ 3rd Gen Lifters - make an offer
Gauges - make an offer
Misc Interior Pieces - make an offer
Rear Hatch, Sails, Glass - make an offer
Steering parts - make an offer



5 Good Wiseco Pistons & Stock Rods, size:91.5 13k miles on all. A spun bearing destroyed 1 of the pistons and rods, that why there's only 5. I paid $550 for the pistons, and the rods were $135 a piece. You can buy 1 new piston from Wiseco for $125. I'll do $200 for this whole set!


2nd Gen forged crank w/ spun bearing. Needs to be turned. $40


Cam covers $35


Timing Cover $25


Spark Plug Cover $5


Good Stock Axles. $25 for Passenger Side, $35 for Driver's side. $50 for pair


Stock Pre-turbo Piping $40


Stock MAF sensor with K&N style filter(not a turn K&N). Make offer


10 Stock Pistons and Rods. Some are good. $50 for all or $10 each



Throttle Body - make offer
Stock Suspension - make an offer
Doors - make an offer
Walbro Fuel Pump(only about 5,000 miles) - $60



Pearl Front Bumper -SOLD
Pearl Rear Bumper - SOLD
Side Skirts - SOLD
Unorthodox Pulley - SOLD
JPDC KIT W/ TURBOS - SOLD
Maximal Perf. Solid Motor Mounts - SOLD
Racing Seats - SOLD
ECU - SOLD
Dash - Pending Sale
Rear Speaker Panels - Pending Sale

_________________

Check out my mortgage site: mattpody.com

Why?

Tell me about the "JPDC TD05 Adapter kit(which is no longer in production)."

You wouldn't have any 18" wheels, would you?

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net

It's got the stock 17"s.

I got the JPDC Adapter plate kit from RustangCobra on 3si. It's 2 adapter plates, the 02 housings, some hard intercooler piping, Front Oil Mabobber, and Custom front Motor Mount(otherwise you can't fit the turbo). The Motor Mount is Billet Aluminum.

(1)Front Adapter plate
(1)Rear Adapter plate
(1)Front coated 02 housing w/dump tube
(1)Rear coated 02 housing w/dump tube
(2)Oil feed fittings
(1)Front oil return adapter
(1)JPDC Motor Mount Bracket
(1)Front Intercooler pipe
(2)Rear Intercooler pipes
(2)Silicone Couplers
(10)Metric Studs

It's next to impossible to find this kit anymore. It took me months to find this one. I paid $1,100 without any oil feed or return lines. I'll throw in my braided return and feed lines, and my price is $1000 firm. I put 13,000 miles on this setup.

I also have 1 16G EVO3 Turbo that only has about 3,000 miles on it. It's practically brand new! I want $300 for that, and I have 1 small 16G turbo that I want $200 for. It's got 13,000 on a rebuild.

So for $1500, you could have everything that you need to run TD05's! Isn't that about the same price as 2 13Gs?

I have many, many more parts, so ask away!

_________________

Check out my mortgage site: mattpody.com

I'm parting it out because I'm buying a '04 STi....

_________________

Check out my mortgage site: mattpody.com

Here's part of a list that I just threw together. There's more, just ask....

Pearl Front Bumper -SOLD
Pearl Rear Bumper - SOLD
Side Skirts - SOLD
Unorthodox Pulley - SOLD
JPDC KIT W/ TURBOS - SOLD
Dash - Pending Sale
Rear Speaker Panels - Pending Sale

RPS Maxx Street Clutch(3,000 miles on it) - $400
Fidanza Flywheel(13,000 miles on it) - $250
Nearly Complete 25 Spline Trans - make an offer
Pearl White Hood - $50
17" Stock wheels - $300
driveshaft - make an offer
rear end - make an offer
brakes - make an offer
DSM BOV w/ adapter - $40
Stock Intercoolers - make an offer
Misc Engine Parts - make an offer
3 Engine Blocks(Turbo, 2 bolt) - $50 each, all need bore
Stock Heads w/ 3rd Gen Lifters - make an offer
Racing Seats - $200
Gauges - make an offer
Misc Interior Pieces - make an offer
Rear Hatch, Sails, Glass - make an offer
Steering parts - make an offer
Maximal Performance Solid Motor Mounts(Brand new) - I paid $200(I'm going to try to return)
PTE 680cc Fuel Injectors(never used) - $400



5 Good Wiseco Pistons & Stock Rods, size:91.5 13k miles on all. A spun bearing destroyed 1 of the pistons and rods, that why there's only 5. I paid $550 for the pistons, and the rods were $135 a piece. You can buy 1 new piston from Wiseco for $125. I'll do $200 for this whole set!


2nd Gen forged crank w/ spun bearing. Needs to be turned. $40


Stock Oil Pan. No problems. $40


Cam covers $35


Timing Cover $25


Spark Plug Cover $5


Good Stock Axles. $25 for Passenger Side, $35 for Driver's side. $50 for pair


Stock Pre-turbo Piping $40


Stock MAF sensor with K&N style filter(not a turn K&N). Make offer


10 Stock Pistons and Rods. Some are good. $50 for all or $10 each



Throttle Body - make offer
Stock Suspension - make an offer
Doors - make an offer
Maximal Performance T-Case Bracket(Brand new) - I paid $80(i'm going to try to return)
Apexi SAFC2 - $175
Walbro Fuel Pump(only about 5,000 miles) - $60

_________________

Check out my mortgage site: mattpody.com

I would like a lot of parts actually. Is there a time I could come visit you and see what I need, and work out pricing?

_________________

MMBOOST

Sure! I'll be PMing you my phone number in a second....

_________________

Check out my mortgage site: mattpody.com

Here's a link to my car domain. It's outdated, but just so you can get an idea:
http://www.cardomain.com/ride/860612

[/url]

_________________

Check out my mortgage site: mattpody.com

would you cut me a deal for the front bumper, rear bumper, side skirts, door caps, and wing

Sure...shoot me an offer

_________________

Check out my mortgage site: mattpody.com

i'll probably have to come out and take a look. thanks

It'll be back at my house before the weekend. Let me know when you wanna come out and see it.

_________________

Check out my mortgage site: mattpody.com

wheres the car at now? If its in burlington i can pretty much come out whenever. I guess my other question would be is how far off of a color do you think pearl white would be compared to my stealth's white

The car is in Milwaukee right now. My new house doesn't have a garage yet, so it's at my girlfriend's mom's garage. I couldn't tell you on the color difference, I thought the stealth was Pearl white too?

_________________

Check out my mortgage site: mattpody.com

unfortunately i dont think so. So in any case, are you free any time after today? I'd love to stop by and take a look. And maybe get a ride in the STI