Coming out of hybernation here, so I'm still a bit slow.

I need a hydraulic lash adjuster tool, or the pattern to make one. I'd like to get it ASAP so I can swap out my lifters and make sure everything else is copasetic for the UMG.

Thanks much boys and girls.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

If your looking for the pattern for the tool to remove the hydraulic lifters I have it. If you have a fax number I can send it to you.

SS

920 757 9591

attn: Adam

thank you very much.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

Fax sent. Confirm you received it in working condition. The printing is out to the edge of the paper because the pattern is blown up to the actual size to use as a template. I don't know how much of the edge will be cut off by your fax machine. You may want to make a copy if you use the original for a template.

SS

Adam,

Anyway I made the tool and will send it down to you. It made changing the lifters a breeze.

Just email me your shipping address and I will get it out in the mail today.

Kyle

_________________
93 3000 GT VR4

thanks everyone.

Bunk is sending me his, but I also got your fax big guy. All the tool seems to be there, but the points were off a tad on the measurement. I did mess around with it on the scanner, so I could get it back, but just ran out of time today.

If bunk's gets here before I get a chance to make my own at the shop, I'll just use his. (and let's be honest. with a midget, a fiancee, and a wedding to plan in 3 weeks, I'm prolly just using bunks... )

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

WTF is this $hit!!!!!!!!!!!!

_________________
'94 vr4- Now with extra slowness

IS SHE PREGNANT???

_________________
Confucius say "Man who run behind car get exhausted, man who run in front of car get tired." Unless we are talking about a 3S. Then it's obviously "man who run is going to get another beer!"

Adam the tool is in mail priority. It should be there tomorrow or Thursday at the latest.

And a wedding in 3 weeks??? Well let me say congratulations!! Now take all the money out your wallet and hand it to her so you can get ready for married life.

Remember when you get married it involves 3 rings. The engagement ring, the wedding ring and then the suffering! Just kidding....Congratulations

Kyle

_________________
93 3000 GT VR4

Rubber covered pliers work for pulling the lifter too.

_________________
06 Blue EVO 9

you wouldn't put out. had to come up with a back up plan.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

actually, I have a surgical tong that works fawking awesome. lifters are changed. waiting for mitsu to get the gaskets in. should be tomorrow aft.

By the way, I need someone's vin with a 95 vr-4. this parts crap is getting rediculous. I'm just going to freak'n give up soon if I can't just toss them a vin number. freak'n idiots.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

If you need a P/N I have a copy of CAPS? Or are they not smart enough to look up a number?

_________________
'94 vr4- Now with extra slowness

they tell me that the P/N number is the old system that they cannot use. EVERYTHING uses VIN numbers to look up crap now.

-.-

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!