Okay... Master_D has been begging me to have a little 3/S Repair Party at my house. He's got some work he needs to get done and is too much of a panzy to do it outside in the cold weather, lol Let me know if anyone is interested in coming out for something like this, or has work they need to get done on their car and wanted to use the garage. The only thing I ask is that people pitch in some $ for my propane, cuz them damn tanks cost me $21 to fill up and I'm hurtin' for cash.

The downside is that I will have 2 3/S's in my garage already, neither of which are driveable, so we'd have to roll both of them in my driveway in order to work on your car(s) inside... Not that much of a problem but... this means your car MUST be out of the garage that day. so Greg and I can pull our cars back in.

Would probably be on this coming Saturday or Sunday or next Saturday or Sunday - you guys tell me. If you just want to show up for the hell of it to help out, that's fine too. You dont HAVE to have repairs that need to be done, you can lend a hand and hang out if you want.

Reply to this with:

1. What weekend works best for you
2. What work you need to get done

If we do this, I'd like to start early. Noon at the latest to give us plenty of time for whatever needs to get done.

Lemme know.

_________________

Best in Show - NG07
2010 - 6G74/3.5L E16Gs - 688awhp/679awtq (Race+Meth)
2011 - 6G74/3.5L 68HTAs - 740awhp/762awtq (Race+Meth)
2013 - 6G74/3.5L MTC Stage4 - 908awhp/832awtq (Race+Meth)

haha... thanx jesse. The main thing I'm looking to get done is the rear o2 dump because as many of you know the threads are stripped on my O2 housing and right now I'm constantly trying to cold weld the o2 in there to keep the car running right (which isn't working) ... my engine bay is starting to turn black from all the exhaust that is being dumped into it ... Other work that could be done is rear plugs (I did the front three today) and maft tuning after new o2 and o2 dump are installed. the rpm wire still needs to be hooked up but its behind the firewall anyway. Lemme know if anyone else is up for helping out.

_________________
rob r.

Do yourself a favor and lube all of the bolts starting tonight. Pull the heat shields out (you can run without them for a week) and try to lube each bolt + stud every morning. It'll smoke like hell when you start the car up, but it will be so much easier to pull everything apart when it comes time.

_________________
06 Blue EVO 9

Well I don't wanna start any engine fires or anything.... what were you thinking of lubing them up with?

_________________
rob r.

I'd personally use PB Blaster. You might want to buy a can before coming out as I think I'm pretty much near empty so we're gonna need something.

Seriously though, start dousing those bolts with lube as soon as you can, daily. Greg's got a good point, it'll save us a lot of time.

_________________

Best in Show - NG07
2010 - 6G74/3.5L E16Gs - 688awhp/679awtq (Race+Meth)
2011 - 6G74/3.5L 68HTAs - 740awhp/762awtq (Race+Meth)
2013 - 6G74/3.5L MTC Stage4 - 908awhp/832awtq (Race+Meth)

You won't if you spray everything while it's still cold. Do NOT spray WD-40 or whatever on a hot manifold. Lubricating the studs/bolts while they are cold and warming the motor up is what will break them free.

so are we doing this the last weekend of feb? I'll show up to lend a helping hand. This weekend I'm pretty much booked though.

just saying..... if this is going down next weekend, i know ill be there. cuz by then i MIGHT have my data logger, hoop spoiler, and guages!! more then likely they wont be in tumaro, but i think my hood might come in tumaro . soo ill see whats up by later on tumaro.

_________________
1994 Stealth R/T TT Pearl Yellow
-Out since June 05'
-Almost ready for start up

1991 Stealth R/T Red
-Out for 7 weeks with a spun bearing
-Came back to life on 8/04/07
-Blew the motor again on 11/25/07

Looks like it's going to be this Friday, and possibly this Saturday too.

However, that doesn't mean I can't have another next weekend or thereafter if the need arises, haha.

_________________

Best in Show - NG07
2010 - 6G74/3.5L E16Gs - 688awhp/679awtq (Race+Meth)
2011 - 6G74/3.5L 68HTAs - 740awhp/762awtq (Race+Meth)
2013 - 6G74/3.5L MTC Stage4 - 908awhp/832awtq (Race+Meth)

Jesse, looks like I should be free tomorrow latw afternoon and evening. What time is everybody coming by?

_________________
~Joe - aka spider gear destroyer
'94 Stealth R/T
-Lightly Modded ;)

I think Jeff and I will start around 4:30pm or so... Greg and Rob are coming out around 6'ish or so I think.

I'm going to tackle the springs on my car with Jeff first... That's my first priority I guess. After that will probably be the crank and motor mount. Rob also wants to do up his rear precat sometime either Friday night or Saturday too.

_________________

Best in Show - NG07
2010 - 6G74/3.5L E16Gs - 688awhp/679awtq (Race+Meth)
2011 - 6G74/3.5L 68HTAs - 740awhp/762awtq (Race+Meth)
2013 - 6G74/3.5L MTC Stage4 - 908awhp/832awtq (Race+Meth)

Springs are a piece of cake. Wouldn't be surpised if you'll be almost finished by the time I get there.

Well I came down with something so I won't be making it out tonight. I'm just gonna pound down a steak and call it a night. If I'm feeling better in the morning I'll probably stop down and take care of that precat. I did stop by renner and pick up a new O2 so I'll bring that, a drill, wood boring bits, and pb blaster. anything else?

_________________
rob r.

Alright... We're aiming for this coming Saturday for round #2. So far it looks like Master_D and i3ivix17 might be interested... Possibly R/T Bomber? Anyone else who feels like killing a Saturday to work on cars, and have some beer and pizza, reply here.

_________________

Best in Show - NG07
2010 - 6G74/3.5L E16Gs - 688awhp/679awtq (Race+Meth)
2011 - 6G74/3.5L 68HTAs - 740awhp/762awtq (Race+Meth)
2013 - 6G74/3.5L MTC Stage4 - 908awhp/832awtq (Race+Meth)

Maybe up for a trip! Not 100% or anything but maybe ill come hang out & lend a hand or just supervise..

Not too sure, nothing to be fixed cause my car is stored away. But maybe interested in something to do..
Ryan

_________________
94TT(sold) & 92RT & 99 gsxr600(totalled) 04 GSXR600