What's the procedure to refill to the proper level?

Is there a bleeder valve I open to check the level before I cap it off or what?

Please advise ASAP.

Thanks,

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net

open the cap by the plenum and pour in until full.

check for leaks.

put some in the over flow resoervoir.

Start the car with the cap OFF and let it idle for 5 or 10 minutes to let the car "burp" itself clear of all air bubbles in the coolant.

then screw the cap back on.

you may need to add more as it burps itself.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

Thanks Amad.

Add more to cap fill or overflow?

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net

just to the top of the coolant neck should be fine.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

Thanks, we'll give 'er a shot.

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net