| Author |
Message |
|
wyltk55
|
 Posted: Mon May 22, 2006 8:23 pm |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
filler
Last edited by wyltk55 on Wed Oct 19, 2016 10:33 am, edited 1 time in total.
|
|
| Top |
|
 |
|
wyltk55
|
Posted: Mon May 22, 2006 9:16 pm |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
filler
Last edited by wyltk55 on Wed Oct 19, 2016 10:34 am, edited 1 time in total.
|
|
| Top |
|
|
|
A923KGT
|
Posted: Mon May 22, 2006 10:33 pm |
|
Joined: Wed Aug 20, 2003 9:10 am
Posts: 1120
Location: Mount Horeb, WI
|
|
First, check your clutch fluid level and fill with brake fluid if low. If you add fluid you should bleed the clutch.
Watch the clutch release fork/slave cylinder for movement while pushing the clutch pedal in/out a few times. How far does it move?
Put the car on jack stands, put the car in gear, push the clutch in, start the car and see if the wheels are spinning with the clutch in. This will help narrow it down to either transmission related or clutch related. If the wheels are spinning, it's a clutch issue. If the wheels are not spinning, it's most likely a transmission problem.
Hope this helps
a
|
|
| Top |
|
|
|
G-ELL
|
Posted: Mon May 22, 2006 10:45 pm |
|
Joined: Wed Aug 13, 2003 1:18 am
Posts: 3153
Location: Lehigh Valley, PA
|
|
Check for a leak inside the cabin above the clutch pedal. It'll probably be very small if at all.
The next place to check is the slave cylender& the rubber line. I think there is a step by step procedure with pics on stealth316.com for replacing it, but you can use them to find it and check for leaks. You'll need to remove your intake pipe in order to see it.
_________________ 06 Blue EVO 9
|
|
| Top |
|
|
|
wyltk55
|
Posted: Tue May 23, 2006 7:19 am |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
filler
Last edited by wyltk55 on Wed Oct 19, 2016 10:34 am, edited 1 time in total.
|
|
| Top |
|
|
|
wyltk55
|
Posted: Tue May 23, 2006 5:08 pm |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
filler
Last edited by wyltk55 on Wed Oct 19, 2016 10:34 am, edited 1 time in total.
|
|
| Top |
|
|
|
440 4x4
|
Posted: Tue May 23, 2006 8:53 pm |
|
Joined: Mon Dec 01, 2003 9:56 am
Posts: 637
Location: Milwaukee
|
|
Couple hundred bucks will get you a new clutch on your N/A. If you have mechanical knowledge you can do it yourself. Or, sometimes people will come and help if you feed them.
Or, you can bring it to someone like me.
|
|
| Top |
|
|
|
wyltk55
|
Posted: Wed May 24, 2006 7:28 am |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
filler
Last edited by wyltk55 on Wed Oct 19, 2016 10:35 am, edited 1 time in total.
|
|
| Top |
|
|
|
440 4x4
|
Posted: Wed May 24, 2006 2:23 pm |
|
Joined: Mon Dec 01, 2003 9:56 am
Posts: 637
Location: Milwaukee
|
|
PM sent back two minutes ago.
I do not have internet access at work (only person in the world, I know), so I only check at home...
|
|
| Top |
|
|
|
wyltk55
|
Posted: Wed May 24, 2006 11:23 pm |
|
Joined: Sun May 15, 2005 3:40 pm
Posts: 65
|
|
| Top |
|
|
