| Author |
Message |
|
Turbo_StealthRT
|
 Posted: Thu Jul 14, 2005 9:13 pm |
|
Joined: Sat Oct 16, 2004 9:47 am
Posts: 41
Location: St. Paul, MN
|
|
Hi everyone--I am parting out my 92 TT. I have already sold some parts from it to various members on the MN forum. Below is a list of parts that I have available immediately. Since I am in MN, most of these parts can be shipped or if you come to the All Mitsu Cookout, then you can pick them up there. I have lots of other parts available, just post or PM me for availability.
Stock TD-04 9b turbos (front and rear)
Bosch remanufactured starter (very few miles)
Alternator
Powered, heated side mirrors (both sides)
Stock Intercoolers (both sides)
Carpet (grey/charcoal colored)
Rear seat interior panels (covering rear speakers)
Passenger side front fender
Passenger side window regulator
Driver side "snake eye/turn signal" (for 91-93 RTs)
Front side windows
Factory o2 sensors (front and rear)
Brake calipers (front and rear)
Brake rotors (front and rear)
ECS strut caps (front and rear)
*Note: I will keep this list updated with additional parts that I find in my garage.*
Thanks,
Brad
_________________
Brad
92&93 RT TT
Mods:
TD04L 13T's | Alamo Side Mount Intercoolers | RC 550 cc injectors | Supra fuel pump | SBC DXD 6-puck | 3SX Poly Motor Mount | TySpeed DP w/ TP | custom Magnaflow exhaust | DSBC | S-AFC | + much more
|
|
| Top |
|
 |
|
rick
|
Posted: Mon Jul 18, 2005 4:33 pm |
|
Joined: Mon May 30, 2005 2:19 pm
Posts: 30
Location: Oak Creek, WI
|
|
Is the carpet dark grey? I need a front plastic strut cover. Do youhave one?
Thanks
_________________
Oak Creek Black 91 Stealth Turbo AWD
|
|
| Top |
|
|
|
Turbo_StealthRT
|
Posted: Tue Jul 19, 2005 10:26 pm |
|
Joined: Sat Oct 16, 2004 9:47 am
Posts: 41
Location: St. Paul, MN
|
rick wrote: Is the carpet dark grey? I need a front plastic strut cover. Do youhave one?
Thanks Yep, the carpet is the dark grey/charcoal color. For the front plastic struct cover are you referring to the cover that protects the ECS wiring and is held on by the 3 nuts that attach the strut to the strut tower? If so, then yes I have that piece. Do you also need the ECS wiring harness? Thanks, Brad
_________________
Brad
92&93 RT TT
Mods:
TD04L 13T's | Alamo Side Mount Intercoolers | RC 550 cc injectors | Supra fuel pump | SBC DXD 6-puck | 3SX Poly Motor Mount | TySpeed DP w/ TP | custom Magnaflow exhaust | DSBC | S-AFC | + much more
|
|
| Top |
|
|
|
rick
|
Posted: Wed Jul 20, 2005 4:48 pm |
|
Joined: Mon May 30, 2005 2:19 pm
Posts: 30
Location: Oak Creek, WI
|
|
I think your talking about it the black plastic dish thing over the Mcpherson strut. The strut is has 3 bolts around it. What kind of condition would you say the carpet is in? iknow it is real hard to convey color over the netbut, is the carpet as dark as the interior plastic molding?
I need the yellow drivers side lens for the turn signals. I think you listed that as well.
thanks
_________________
Oak Creek Black 91 Stealth Turbo AWD
|
|
| Top |
|
|
|
Turbo_StealthRT
|
Posted: Wed Jul 20, 2005 8:32 pm |
|
Joined: Sat Oct 16, 2004 9:47 am
Posts: 41
Location: St. Paul, MN
|
Here is the strut cap that I am referring to:  Here is a pic of the driver's side snake eyes/turn signal lens. There is a small hole in the "snake eyes" portion from a rock that was there before I purchased the car. It has been there for over 5 years and hasn't been a problem.  Here is a photo of the carpet. It is the standard grey carpet for the 3/S. I believe the only other colors were tan and red for 1st gens. I'd say the carpet is in very good condition for being 13 years old. I don't think there are any wear spots. If you are interested, I may be able to vacuum it and take a photo of it since it has been removed from the car.  Brad
_________________
Brad
92&93 RT TT
Mods:
TD04L 13T's | Alamo Side Mount Intercoolers | RC 550 cc injectors | Supra fuel pump | SBC DXD 6-puck | 3SX Poly Motor Mount | TySpeed DP w/ TP | custom Magnaflow exhaust | DSBC | S-AFC | + much more
|
|
| Top |
|
|
|
k2sloap
|
Posted: Wed Jul 20, 2005 9:37 pm |
|
Joined: Tue Mar 08, 2005 1:13 pm
Posts: 32
Location: minocqua, W.I.
|
|
how much for the intercoolers??
Thanks Jeff
_________________
VR-4 pure adrenaline
|
|
| Top |
|
|
|
Turbo_StealthRT
|
Posted: Fri Jul 22, 2005 10:54 pm |
|
Joined: Sat Oct 16, 2004 9:47 am
Posts: 41
Location: St. Paul, MN
|
|
I just wanted to let everyone know that I will probably not have access to the net for several days. I will reply to everyone's questions as soon as I have access again.
Thanks,
Brad
_________________
Brad
92&93 RT TT
Mods:
TD04L 13T's | Alamo Side Mount Intercoolers | RC 550 cc injectors | Supra fuel pump | SBC DXD 6-puck | 3SX Poly Motor Mount | TySpeed DP w/ TP | custom Magnaflow exhaust | DSBC | S-AFC | + much more
|
|
| Top |
|
|
|
woodystealthdude
|
Posted: Mon Jul 25, 2005 11:00 am |
|
Joined: Wed Jun 15, 2005 10:02 pm
Posts: 83
Location: Hayward, WI
|
|
how much for those seats front and back If you still got them. Do you happen to have the drivers side flip up headlight assembly? just the assembly no motor and the body panel above that. 1 more thing. how much for that rear wiper toggle switch on the right side of steering column? You can give me one whole price or just a price with out the seats. Thanks. Woody
_________________ 
She's my baby! 
~Woody...
|
|
| Top |
|
|
|
G-ELL
|
Posted: Mon Jul 25, 2005 11:03 pm |
|
Joined: Wed Aug 13, 2003 1:18 am
Posts: 3153
Location: Lehigh Valley, PA
|
|
Hey, do you still have the front drivers side hub? Is the wheel bearing any good still? How do the oil seals look?
_________________ 06 Blue EVO 9
|
|
| Top |
|
|
|
niterydr
|
Posted: Tue Jul 26, 2005 4:49 pm |
|
Joined: Fri Aug 15, 2003 7:43 am
Posts: 13
Location: Maple Grove, MN
|
|
Digital climate control screen (turbodude) and 'box' that controls it (mounts behind it).
_________________
-1993 dodge stealth rt/tt
dark orchid pearl, canadian
11.657 @ 127.08mph...92 octane
11.45@ 135.76mph...C-16+wheelspin
LSE Performance
|
|
| Top |
|
|
|
pearlyellow
|
Posted: Thu Jul 28, 2005 1:03 pm |
|
Joined: Wed Mar 23, 2005 4:49 pm
Posts: 187
|
|
how much for the calipers and will they fit a 95 vr4?
|
|
| Top |
|
|
|
G-ELL
|
Posted: Thu Jul 28, 2005 1:17 pm |
|
Joined: Wed Aug 13, 2003 1:18 am
Posts: 3153
Location: Lehigh Valley, PA
|
pearlyellow wrote: how much for the calipers and will they fit a 95 vr4? The 92s have 2 piston front calipers and smaller rotors. These won't fit on your car Kyle. _________________ 06 Blue EVO 9
|
|
| Top |
|
|
|
pearlyellow
|
Posted: Thu Jul 28, 2005 1:29 pm |
|
Joined: Wed Mar 23, 2005 4:49 pm
Posts: 187
|
|
its always to good to be true. were still setup for saturday, i have the spring compressor and ill pick up 24 pack with ice.
|
|
| Top |
|
|
|
pearlyellow
|
Posted: Thu Jul 28, 2005 1:31 pm |
|
Joined: Wed Mar 23, 2005 4:49 pm
Posts: 187
|
i also ordered the hawk pads and the upper control arms. someone has to keep 3sx busy. i just got the 3sx pulley in the mail, man is that thing sweet lookin 
|
|
| Top |
|
|
|
pearlyellow
|
Posted: Thu Jul 28, 2005 1:33 pm |
|
Joined: Wed Mar 23, 2005 4:49 pm
Posts: 187
|
the pads and arms should be here by mon-tues i cant wait..... 
|
|
| Top |
|
|
